Copper Press Ftg x C Elbow
GUTPRESS Copper Press Elbow
- For use with ASTM B 88 tubing
- Copper
-Press connection
- Components: EPDM sealing elements
-Available in sizes 1/2" to 2"
Model 9001
Features and benefits
The original copper press joining solution
Available in sizes 1/2" to 2", including elbows,couplings,tees,reducer, fitting reducer,caps,
Customizable with three sealing elements, EPDM, HNBR,FKM
leak detection feature identifies un-crimped connections
compatible with most common pressing tools and jaws in the market
All tubing must comply with the ASTM B88 standard
Operating parameters:
Operating pressure: 200PSI CWP max
Operating temperature range:-20°F-250°F
Approved applications
-Potable water
- Hydronic heating
-Chilled water
- Compressed air
-Non-medical gases
-Low pressure steam
Approvals & Certifications
CUPC
Installation Instructions
- Cut tube square using a tube cutter or fine tooth saw
- Deburr tube ID using a deburring tool
- Deburr tube OD using half round file
- Check fittings bead to ensure seal is present. Do not use any type of oil lubrication
- Mark tube to proper fitting insertion depth( see insertion depth chart below)
| Fitting Insertion Depth Chart(1/2"-2") |
| Tube size |
1/2" |
3/4" |
1" |
1-1/4" |
1-1/2" |
2" |
| Insertion Depth |
3/4" |
7/8" |
7/8" |
1" |
1-7/16" |
1-9/16" |
- Turn slightly while sliding press fitting onto tube. Slide all the way to insertion mark and make contact with stop
- Place press tool at a right angle over fitting bead .Start the pressing process. Please see specific tool manufacturer for tool instruction
Company and production line view:
Audited Supplier 
){kind=link}
){kind=link}